How To Insert A Disc; Volume Control; Selecting The Media Mode - FUNAI PB750FX1 El Manual Del Propietario

Tag information
<Title name information>
TITLE
1
<Artist name information>
ARTIST NAME
2
1. Title name based on tag information of
current Windows Media™ Audio file
2. Artist name based on tag information
of current Windows Media™ Audio file
Decoding format information
Dolby Digital
1
1. Decoding format

How to Insert a Disc

1
Press [A OPEN] on the unit to open
the disc lid.
2
Place the disc on the turntable until
it clicks into place with its label side
facing up.
• Make sure the disc is compatible with
this unit. (Refer to page 18 for the list of
compatible discs.)
3
Close the disc lid until it clicks.
It may take a while to load the disc.
To eject the disc:
Press [A OPEN] on the unit to open the disc
lid.
Remove the disc.
Close the disc lid until it clicks.
EN

Volume Control

You can control the volume level of the audio
output from the speakers.
To increase or decrease the volume level :
+
Press [VOL. ] or [VOL.–].
• The volume level will increase or decrease,
every time you press [VOL.
• You can also increase or decrease the
volume level by holding down [VOL.
[VOL.–].
• The volume level will be displayed on the
LCD screen.
Note
• This function is only available for the
audio output from the speakers of this
unit or (headphone) jack. (Not
effective for the audio output from AV
OUT jack and HDMI OUT jack.)
+
• Pressing [VOL.
work while the setup menu is displayed.
• If you turn up the volume too much,
the audio may get distorted. To enjoy
clear sounds, please turn down the
volume.

Selecting the Media Mode

For the playback media to be read by this
unit, the correct media mode should be
selected. You can switch the media mode by
following the steps below.
1
In stop mode, press [SETUP].
2 Use [K / L] to select
[OK] .
3
Use [K / L] to select "Mode Select",
then press [OK].
4
Use [K / L] to select the desired
media mode, then press [OK].
5
Press [SETUP] to exit.
• Selected media mode is now activated.
+
] or [VOL.–].
+
] or [VOL.–] does not
, then press
(continue on next page)
] or
21