Charging - i.t.works ER701 Manual Del Usuario

To power On and Off the Reader
● Press and hold the [Power] button for 2 seconds to turn on
Reader.
● It may take a few moments for the Reader to turn on and
load the content.
If Reader does not turn on, charging is required.
●
To turn off Reader, press and hold [Power] button for 2
●
seconds.
Charging the Reader
● You need to charge the Reader prior to using it for the first time or
when the battery power is low.
● Please turn the Reader to standby mode to shorten the charging
process.
It will take about 6 hours to fully charge the Reader in standby
●
mode (LCD off)
When DC /USB power cable is connected to the Reader for
●
charging, the Reader will enter into standby mode after remaining
idle for 60 secs. Press the [Power] button to wake up the Reader.
● The battery status is displayed at the bottom left corner. The
remaining battery playback time is displayed next to the battery
icon.
Getting Started
3