Turning on and off the reader
1. Slide the power switch on the bottom of the reader to turn on the reader.
2. Press and hold
3. To turn off the reader, press and hold
slide the power switch to turn off the reader.
Charging the reader
You need to charge the reader when using it for the first time, or when the remaining
battery power is low.
• Connect the reader to your computer using the
supplied USB cable.
• Connect the reader to an AC outlet using the power
adapter (not supplied).
To check the battery status, you can check the battery indicator on the top right of
the screen. Charge the battery when remaining power is low (the fewer green
segments indicated, the lower the remaining power).
The battery should be charged for at least 12 hours before first use to ensure the
best battery life.
Inserting a memory card into the reader
Insert a TF card in the TF card slot the with its label side up
until it clicks into place.
To remove a memory card form the reader, gently push in
the memory card and remove the memory card squarely
from the slot.
TRANSFERRING CONTENT FILES
until the welcome screen appears.
until the goodbye screen appears or
4