Connecting To Network - Sherwood RD-606i Instrucciones De Funcionamiento

RD-606i(G)_ENG_110511_RD-606i(G)_ENG 2011-05-13 오전 9:57 페이지 7
4.
CONNECTING DIGITAL INS
• The OPTICAL and the COAXIAL DIGITAL OUTs of the
components that are connected to CD, VIDEO 1 and VIDEO 2 of
this unit can be connected to these DIGITAL INs.
• A digital input should be connected to the components such as a
CD player, DVD player, etc. capable of outputting DTS Digital
Surround, Dolby Digital or PCM format digital signals, etc.
• For details, refer to the operating instructions of the component
connected.
• When making the COAXIAL DIGITAL connection, be sure to use
a 75Ω COAXIAL cord, not a conventional AUDIO cord.
• Some of the commercially available optical fiber cords cannot be
used for the equipment. If there is an optical fiber cord which
cannot be connected to your equipment, consult your dealer or
nearest service organization.
■Note :
• Be sure to make either a OPTICAL or a COAXIAL DIGITAL
connection on each component. (You don't need to do both.)
■Digital input default settings
• If you connect the DIGITAL INs to your components, it is easier to do so following the default settings.
• If your DIGITAL connections are different from default settings, you should assign the DIGITAL INs you used with the "When
selecting the DIGITAL IN" procedure on page 41.
• The default settings are as follows :
OPTICAL IN : VIDEO 1, COAX 1 IN : VIDEO 2, COAX 2 IN : CD
5.
CONNECTING SUBWOOFER PREOUT
• To emphasize the deep bass sounds, connect a powered
subwoofer.
6
.

CONNECTING TO NETWORK

• To connect this unit to a broadband home network to listen to internet radio broadcast, connect the LAN/ETHERNET
connector of this unit to your router with a Ethernet cable (CAT-5 or greater recommended).
■Notes :
• After making a broadband internet connection, you should set the communication settings.
(For details, see "When selecting "Network"" on page 32.)
• When using a broadband internet connection, a contract with an internet service provider is required.
For more information, contact your nearest internet service provider.
• Refer to the operating instructions of the equipment because the connected equipment and connection method may differ
depending on your internet environment.
• Use a Ethernet cable/router supporting 10 BASE-T/100 BASE-TX.
• Some Ethernet cables are easily affected by noise. We recommend using a sheilded type cable.
Internet
LAN
Modem Broadband router
7
SUBWOOFER
OUT
LAN / ETHERNET
PC
COAX 1
( )
VIDEO 2
COAX 2
(CD)
OPT
( )
VIDEO 1
DIGITAL IN