English - Kenwood SD100 Serie Manual De Instrucciones

Ocultar thumbs Ver también para SD100 Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
1

English

before using your Kenwood
before using for the first time
appliance
1 Wash the parts: see 'cleaning'.
Read these instructions carefully and
key
retain for future reference.
Remove all packaging and any
control switch
labels.
beaker support/interlock
mixing shaft
safety
beaker rest
beaker
general
maximum level
Never touch the mixing shaft whilst
minimum level
the appliance is plugged in.
tilting head
Keep fingers, hair, clothing and
utensils away from moving parts.
to use your drinks
Always unplug:
maker
● ●
before fitting or removing parts
● ●
after use.
1 Make sure the control switch is off
● ●
before cleaning
(O) and then plug into the power
Never mix hot ingredients.
supply.
Never use a damaged appliance.
2 Place the ingredients into the beaker.
Get it checked or repaired: see
The beaker must always be filled to
'service'.
at least the minimum level mark or
Never put the appliance in water or
the liquid will not reach the mixing
let the cord or plug get wet - you
shaft. Do not fill above the
could get an electric shock.
maximum level mark or liquid may
Never let the cord touch hot
overflow while mixing.
surfaces or hang down where a
3 Place the beaker onto the drinks
child could grab it.
maker, making certain that the
Never add ingredients to the beaker
beaker's top edge is behind the
whilst the appliance is operating.
beaker support/interlock and its
Only use the appliance with the
bottom edge is on the beaker rest.
beaker supplied.
Failure to locate the beaker into the
Make sure the beaker is located
beaker support/interlock will prevent
correctly before switching on the
the appliance from operating.
appliance.
To assist with the fitting or removal
Do not let infirm people use the
of the beaker the drinks maker head
appliance without supervision.
can be tilted upwards
Do not let children use or play with
the head during the mixing
the appliance.
operation.
Only use the appliance for its intended
4 Move the control switch to the
domestic use. Kenwood will not accept
desired speed. Start mixing on
any liability if the appliance is subject to
speed 1 then increase to speed 2 if
improper use, or failure to comply with
required.
these instructions.
Most drinks should be mixed in less
before plugging in
than 2 minutes.
Make sure your electricity supply is
5 When mixing is complete, switch off
the same as the one shown on the
the drinks maker, remove the beaker
power handle.
and pour out the drink.
This machine complies with
European Economic Community
Directive 89/336/EEC.
2
. Never tilt
Tabla de contenido
loading

Tabla de contenido