E N G L I S H
MAINTENANCE
Your D
WALT tool has been designed to operate
E
over a long period of time with a minimum of
maintenance. Continuous satisfactory operation
depends on proper tool care and regular cleaning.
The following maintenance operations must be
performed every day.
Cleaning
• Clean the magazine and the nosepiece using
compressed air.
• Clean the front end of the contact trip using fuel
oil or diesel fuel.
Draining
• Drain all condensation from the air compressor
tanks and hoses.
Lubrication
• Insert 5 - 7 drops pneumatic tool oil into the air
fi tting on the end cap of the tool.
Checking
• Ensure that all fasteners on the tool are tight and
undamaged.
• Tighten loose fasteners using the appropriate tool.
24
Protecting the environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D
WALT provides a facility for the collection and
E
recycling of D
WALT products once they have
E
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D
WALT offi ce at the address indicated in this
E
manual. Alternatively, a list of authorised D
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com.
WALT product
E
WALT
E