Clock Adjustment - Teac SR-L35 Manual Del Usuario

1
Press the DISPLAY button to select clock
display.
":" blinks in the clock display.
< If the unit is in standby mode, press and hold the
MEMORY/CLOCK ADJ button for 2 or more
seconds, and continue the procedure from step
< Press the STOP button to cancel the time setting.
(In the TUNER mode, press the DISPLAY button.)
2 Within 4 seconds, press and hold the
MEMORY/CLOCK ADJ button for 2 or more
seconds.
3
Press the .m or ,/ button to select
"12H" or "24H".
< In TUNER mode, use the TUNING button.
4 Press the MEMORY/CLOCK ADJ button.
If you have selected "12H", "AM" or "PM"
appears on the display.
16

Clock Adjustment

DISPLAY MEMORY/CLOCK ADJ
.m,/
5 Press the .m or ,/ button to set
the current hour.
< In the TUNER mode, use the TUNING button.
6 Press the MEMORY/CLOCK ADJ button.
3
.
7 Press the .m or ,/ button to set
the current minute.
< In the TUNER mode, use the TUNING button.
8
Press the MEMORY/CLOCK ADJ button to
finish the time setting mode.
The clock starts from 00 second.
< If the unit is disconnected from the power supply
for more than 3 minutes, the clock and timer
setting will be reset.
< If the unit is disconnected for less than 3 minutes
the time displayed may not be correct.