GB
Washing Clothes
1.Open the door to load the articles into the drum.
DO NOT OVERLOAD the appliance or your laundry may not be washed properly.
Please refer to the chart below to determine the load capacity for the type of
laundry you are washing.
2.Close the door.
3.Put the detergent and, if required, softener or pre-wash detergent, in the appropriate compartments.
4.Turn the water supply on and press
5.Turn the programme selection knob to select the desired programme.
6.Repeatedly press
7.Repeatedly press
8.Press
and the appliance will begin the cycle.
-If the delay timer is set, the delay time will appear on the display. After the delay time has elapsed,
the appliance will begin the cycle. See the Delay function section below.
-To pause, press
9.When the cycle is finished, the display will briefly show "End".
-If the signal function is activated, the appliance will sound.
10.Open the door and remove the laundry.
Delay function
You can use this function to delay the start time of a programme.
After you select a programme, repeatedly press
The time and the symbol
-The maximum delayed start time is 24 hours.
-Each time you press this button, the start time will be delayed by one hour.
-To cancel the delayed start, first press
shows "0h".
Signal function
You can use this function to turn on or off the sound made when pressing the buttons or turning the
programme selection knob.
Temp.°C
Press and hold
indicate the signal function is activated.To deactivate this function, press and hold
Temp.°C
and
Fabric Type
Cotton
Synthetic
Wool
Delicate
Temp.°C
to select the desired temperature.
/
/
to select the desired spin speed.
Essorage
again.
will appear on the display.
/
/
and
/
/
Essorage
again for about 3 seconds until the beeps are heard.
Load Capacity
8 kg
4 kg
2kg
2.5 kg
.
/
Départ
to set the desired time and then press
différé
and then repeatedly press
Essorage
for about 3 seconds until beeps will be heard to
30
Départ
/
until the display
différé
.