Network Settings - Outlimits K2 Guia Del Usuario

4.1.2.3 Time and date: To set the current time, date and the display format.
- Set home city: To set the home city.
Note: This option needs application together with the auto time renewal, and needs the network support for
operation of auto time and date renewal.
- Set time/date: To set the current time and date.
- Set format: To set the time and date display format.
- Update with time zone:Enable or disable update with time zone.
Note: It is required to reset the time again when you load battery again or switch on the phone again after charging
the battery if you remove the battery from the cell phone or if the battery has already been exhausted for a very
long period.
4.1.2.4 Schedule power on/off: Set the designated phone On/Off time.
Caution: In particular area (such as airplane compartment) forbidding the use of a cell phone, you shall confirm that
the Schedule Power On/Off function is disabled to avoid an accident.
4.1.2.5 Language: To select the used language for the phone.
4.1.2.6 Pref. input methods: To set the default input method according to your operation habit.
4.1.2.7 Greeting text:
Status: Enable or disable the greetings, you will see the greeting interface when switch on the function.
Greeting Text: Edit the content of the greetings.
4.1.2.8 Dedicated key:
You can appoint the shortcuts of direction keys. Press a key to use the corresponding function under standby
interface.
4.1.2.9 Auto update of date and time: Enable or disable auto updating of date and time.
4.1.2.10 UART settings: SIM1 or SIM2
4.1.2.11 Misc.settings: Bright and time of screen display can be set by LCE backlight.

4.1.3 Network settings:

SIM card 1/2 Network Setup
the
25