Installing The Auxiliary Handle; Installing The Guard - Toro PowerPlex 51132 Manual Del Usuario

3
Installing the Auxiliary
Handle
Parts needed for this procedure:
1 Auxiliary handle
Procedure
1. Line up the groove along the handle with the
groove on the auxiliary handle and slide the
auxiliary handle toward the trimmer handle (A of
Figure 3).
2. Snap the handle securely into place (B of
3).
Figure 3
4

Installing the Guard

Parts needed for this procedure:
1 Guard
4 Phillips head screw
Procedure
Remove the 4 Phillips head screws that are taped to
the guard and use them to install the guard
Figure
g195362
9
(Figure
Figure 4
4).
g207324