Introduction; General Information; Characteristics - D.A.S. Audio CT-1 MKIII Manual De Usuario

1.1.- GENERAL INFORMATION

The D.A.S. CT series controllers have been developed using the latest computer aided electronic
design systems. All electronic components used in the "CT" series controllers have been carefully selected to
meet demanding quality control procedures carried out by our staff of engineers. The rugged 1-mm thick steel
chassis offers ample protection for the electronic circuitry.
All models comply with the technical specifications of the European Union legislation regarding CE
marking.

1.2.- CHARACTERISTICS

1.2.1.- General
- Signal polarity according to norm AES14-1992 (ANSI S4.48-1992).
- Safety regulations prohibit the possibility of the unit's power supply to be inadvertently changed,
both 120 Vac and 240 Vac versions are available.
- Balanced inputs with XLR (Cannon) connectors.
- Since heat build-up is minimal, forced ventilation is not required.
- All controllers use a Linkwitz-Riley, 24 dB per octave type filter.
- Featuring subsonic-filter at 20 Hz and ultrasonic-filter at 22 kHz.
1.2.2.- Model specific
CT-1 MKIII
- Stereo controller with a monophonic bass channel output (operational only in bi-amp mode).
- Un-balanced output with XLR (Cannon) connectors.
- Mode of operation and tone boost switches.
- Bass channel gain control.
CT-28V2, CT-28V3, CT-1000, CT-1500, CT-1800, CT-2000
- Monophonic controllers with built-in limiters.
- Balanced outputs.
- Operational mode switch (CT-1000 and CT-2000 only).
- Output gain control for each frequency band.
WEIGHT AND DIMENSIONS
CT-1 MKIII :
CT-28V2/28V3/1000/1500/1800/2000 :
D.A.S.
D.A.S. Audio, s.a.

1.- INTRODUCTION

2.15 kg.
4.73 lbs.
3.35 kg.
7.37 lbs.
CT-1 (MKIII), CT-28V2, CT-28V3, CT-1000, CT-1500, CT-1800, CT-2000.
483 x 175 x 44 mm
19'' x 6.88'' x 1.73''
483 x 270 x 44 mm
19'' x 10.62'' x 1.73''
US/008-03
(L x W x H)
(L x W x H)
(L x W x H)
(L x W x H)
11