AKASO EK7000 Pro Manual Del Usuario página 12

EN
5. Date Stamp: Off/Date/Date&Time
Default setting is Date.
If you turn on Date Stamp, this camera adds date stamp to the photos and videos
you take.
Note: This camera does not add date stamp to the videos you take if you record
time lapse video or image stabilization is on.
6. Exposure: -2.0, -1.7, -1.3, -1.0, -0.7, -0.3, 0.0, +0.3, +0.7, +1.0, +1.3, +1.7, +2.0.
Default setting is 0.0.
By default, your camera uses the entire image to determine the appropriate
exposure level. However, Exposure lets you select an area that you want the camera
to prioritize when determining exposure. This setting is particularly useful in shots
where an important region might otherwise be over or underexposed. When you
change this setting, the display immediately shows you the effect on your image.
If you change modes, the camera returns to using the entire scene to determine the
correct level of exposure.
7. Photo Resolution: 20MP/16MP/14MP/12MP/8MP/5MP/4MP
Default setting is 20MP.
8. Burst Photo: 3Photos
Burst captures up to 3 photos in 1 second, so it is perfect for capturing fast-moving
activities.
9. Time Lapse Photo: 2S/3S/5S/10S/20S/30S/60S
Default setting is 5S.
Time Lapse Photo captures a series of photos at specified intervals. Use this mode
to capture photos of any activity, then choose the best ones later.
10. Continuous Lapse: Off/On
Default setting is On.
Turn on Continuous Lapse, this camera takes continuous lapse photo in Time Lapse
Photo. If turning off, it will take a single time-lapse photo in Time Lapse Photo.
10