Agilent TwisTorr 305-ICQ Manual Del Usuario página 258

Technical Information
Table 7 Window meanings
Win # Read Write
125 Always Always
126 Always Always
143 Always Always
144 Always Always
147 Always Always
157 Always Always
167 Always Stop
200 Always -
201 Always -
202 Always -
203 Always -
204 Always -
205 Always -
206 Always -
211 Always -
258
Type Name
Set the vent valve
A
operation
Vent valve opening
N
delay
N External Fan Config
External Fan
L
Setting
Vent valve opening
N
time
N Gas Load Type
L Stop speed reading
N Bus current
N
3phase voltage
N Output power
N Driving frequency
N Body temperature
N Pump status
N Error code
controller
N
temperature
Meaning
Set the vent valve operation
0 = Automatic
1 = On command
Vent valve opening delay (expressed in 0.2sec)
external fan configuration:
0 = Always On
1 = Serial (generic output serially controlled)
External fan setting
Vent valve opening time (expressed in 0.2sec; 0=infinite)
0 = molar mass ≥ 30 g/mol (e.g., Ar)
1 = 4 g/mol < molar mass < 30 g/mol (e.g., N2)
2 = molar mass ≤ 4 g/mol (e.g., H2, He)
It reads the pump speed while in stop mode
It reads the actual value of the bus current supplied by controller
to electric motor
It reads the actual value of the 3phase voltage supplied by
controller to electric motor
It reads the actual value of power supplied by controller to
electric motor
This is the actual exciting frequency
It reads the Body temperature
Real time pump status:
0 = Stop
1 = Interlock
2 = Ramp
3 = Autotuning
4 = Braking
5 = Normal
6 = Fail
This location has a bit significant:
11 = Run Up Time
10 = Body HW Over Temp
9 = RFU/Not used
8 = Rotor Locked
7 = Too Hight Load
6 = Fault DRV8305
5 = Vdc (supply) Over Voltage
4 = Thermalpad Overtemp
3 = Vdc (supply) Under Voltage
2 = Controller Over Temp
1 = Pump Over Temp
0 = No connection to pump
It reads the MOSFET bridge temperature
Agilent TwisTorr 305-ICQ & 305-IC SF User Manual
Default
(Factory
Set)
Automatic
3 sec
Always
On
Off
0
Ar
On
---
---
---
---
---
---
---