Light Bulb Replacement; Vacation Tips; Energytips - Sears Kenmore 69272 Manual De Uso Y Cuidado

Vacation Tips
Light Bulb Replacement
WARNING
Disconnect power to refrigerator before replacing light
bulb to avoid electrical shock which can cause severe
)ersonat injury or death. After replacing light bulb,
restore power.
CAUTION
Observe the following to avoid personal injury or
property damage.
Allow light bulbs to cool
Wear gloves when replacing light bulb.
Remove light bulb cover by removing ¼" hex nut
screws. Replace with appliance bulb no greater than
60 watts,
Replace light bulb cover by replacing ¼" hex nut
screws.
1/4" hex nut screws
_ZZ)_- __, ..... @)_ (ZZ_ _t/
Light cover
Complete the following steps for short vacations.
1. Remove perishable foods.
2. If an ice maker is installed, move ice maker arm to
Offposition.
(See "Automatic Ice Maker" section page
I2)
Complete the following steps for long vacations.
1. Empty refrigerator and freezer sections.
2. Unplug refrigerator.
3. Clean refrigerator and door gaskets according to
General Cleaning instructions in "Care and Cleaning"
section.
4. Prop doors open, so air can circulate inside.
5. If an ice maker is installed, turn off water supply to
refrigerator and move ice maker arm to Off
position. (See "Automatic Ice Maker" section page 12)
Energy Tips
This refrigerator is designed to be one of the most energy
efficient refrigerators available. Reduce energy use by
observing the following.
• Operate in normal household temperatures of 55 ° to
110°F (13 ° to 43°C) away from heat sources and direct
sunlight.
• Set refrigerator, freezer, and temperature controlled
meat drawer system controls no colder than necessary.
• Keep freezer section full.
• Keep door gaskets clean and pliable. Replace gaskets
if worn.
• Keep condenser coils clean.
]5