Activating Personal Cards; Deactivating Personal Cards - Fermax PRIVATE Manual De Instrucciones

Tabla de contenido
Kit VIDEO PRIVATE
Kit VIDEO PRIVATE
Activation of personal cards
A total of up to 400 cards may be activated, following these steps:
Beep!
-
+
+
1. Show the MASTER
card. The indicators
will display "activate
card mode."
A "beep" indicates that the card has been correctly activated. If not, indicates
that card had been activated previously, or that the card is faulty.
Annotate the number ef each card for future references.
If you try to activate more than 400 cards, the system will indicate "overload"
( "+" indicator blinking for 5 seconds).
Deactivation of personal cards
To deactivate cards in the system they must be physically available. The
procedure is as follows:
Beep!
Beep!
-
+
+
1. Show the MASTER
card (twice).
The indicators will
display "deactivate
card mode."
Pag 28
Beep!
-
-
+
2.
Show the cards to be activated
one at a time.
Beep!
-
-
+
2. Show the cards to be deactivated one
at a time.
One "beep" indacates that the card
has been deactivated, If not it means
that the card was not activated.
Beep!
-
-
+
+
Beep!
-
+
-
+
Beep!
Beep!
Beep!
Beep!
+ -
-
+
3. Show the MASTER card
at the end, until the
indicators display "nor-
mal mode."
Beep!
Beep!
Beep!
-
+
+ -
3. Again show the MAS-
TER card at the end, until
indicators display "nor-
mal mode."
+ -
+ -
Tabla de contenido
loading

Tabla de contenido