Presto n9537 Guia De Inicio Rapido página 6

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
1) INSTALLATION INSTRUCTIONS
2) English WC bowl
3) PRECAUTIONS FOR USE (The product guarantee depends on the respect for these rules)
INSTALLATION and START UP
For products delivered with filters, these must be installed in accordance with the instructions.
Before commissioning any of our valves, it is essential to carefully drain the pipes that can damage the
mechanisms or water passages (PRESTO® heads that can be dismantled from front).
Recommended operating pressure according to NF EN 816: 1 to 5 bars.
CLEANING
The chrome-plated coating of PRESTO® valves must be cleaned only with soapy water.
Abrasive, acid, alkaline or ammonia-based household products are prohibited.
4) Valve assembly for English WC bowl with manual activation and door contact (according to reference)
5) Composition:
* Control through partition 1.5 to 20cm or 20 to 30cm.
* Time delay flush cock with anti-siphon device.
* Provided with squeeze-type union outlet connection Ø 28mm.
* Knee bend diameter 28mm chrome-plated brass.
* Control box.
* Door contact with wire of 2m length
6) Characteristics:
* Power supplied by 230V/12V transformer, CE compliant, double insulation with built-in safety cut-out device.
* Power supply by two-pin plug.
* Solenoid valve power supply by 2m long wire with Faston 6.35 lug.
* Adjustable time-out, preset at 2 sec + fixed hydraulic time-out 6 sec.
7) WITHOUT DOOR CONTACT
8) WITH DOOR CONTACT
9) Control through partition 1.5 to 200mm
10) Control through partition 200mm to 300mm
11) Maintenance
12) Mark
13) Description
14) CONTROL UNIT
15) CONTROL THROUGH PARTITION
16) DOOR CONTACT
17) FLUSH COCK P1000 M
18) SHUT-OFF VALVE
19) SOLENOID VALVE
20) TUBE Ø28 BENT
21) TRANSFORMER 230 V / 12 V
22) MULTIFUNCTION TIME-DELAY RELAY
23) SWITCH BOX
24) Product installation
25) For wooden or aluminium door frame, the contact and the magnet must be strictly in line
26) ! Disconnect the mains outlet before any intervention!
27) Hydraulic and electric connection
28) TIMER SETTINGS
29) Adjustment ranges from 0.1- 1 sec to 10-100h
30) Adjustment in the selected range from 1 to 10
31) Function selector (supplied on function H)
32) T1: Wash time adjustment
33) This document is not contractual; we reserve the right to modify the characteristics of our products without
notice.
34) PATENTED and REGISTERED MODELS
loading