T-Connector Wiring Kit
INSTALLATION INSTRUCTIONS
1. Read instructions thoroughly before beginning.
2. Open the rear hatch of the
vehicle and remove the cargo net,
threshold plate, trunk floor panels
and the spare tire tray (Fig. 1).
3. Remove the accessory pockets
locate within the interior trim panels
on each side of the vehicle (Fig. 2).
4.
5. From underneath the vehicle,
push both sets of T-Connector ends
through the grommet and into the
vehicle.
Note: The T-connector's black
box and 4-flat trailer connector
will remain outside of the
vehicle.
6. Locate the tail light wiring
harness harness underneath the
right (passenger) side accessory
pocket. The harness will have
connectors similar to those on the
T-Connector harness. Separate the
vehicle connectors taking care not to
damage the locking tabs. Ensure the
connectors are clean and dirt-free.
7. Insert the T-connector harness with the Green wires between
Fig. 1
Fig. 2
Fig. 3
