Usb Operation; Memory Card - Jensen MP1524BT Manual Del Propietário

USB Operation

The unit contains a USB interface (16). The USB interface is located on the front
panel of the unit beneath the protective cover (13). You can connect an USB
memory device using this interface.
1. Lift the protective cover to reveal the USB connector.
2. Locate the USB connector on the front of the radio.
3. Insert the USB device into the USB connector. The unit will read the audio files
on the USB device automatically.
4. If the unit is in another mode of operation press the MODE/PAIR button (5) to
select USB mode.
NOTE: The unit can only support a standard USB memory device. When connecting
an MP3 player and it uses normal batteries (non rechargeable batteries), the
batteries should be removed from the MP3 player first and then connected to the
USB interface. Otherwise, damage to the batteries may result.
When in USB play mode, be sure not to remove the USB driver from the USB
interface.
Memory Card Operation
The SD memory card interface (29) is located behind the SD cover on the front
panel. The connector is used to accept an SD card for playback of audio files. When
you insert a SD memory card in the SD memory card interface, the unit will search
the MP3 files in the card and start to play MP3 files automatically.
SD card operation is the same as the USB memory device described above. If the
unit is in another mode of operation, press the MODE/PAIR button (5) to select
the SD card mode.
22
Front Panel Cover
USB Connector
AUX Connector
MP1524BT