Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
HigH pressure cleaner
The numbers in the text refer to the diagrams
on pages 2-3.
For your own safety and that of others,
we recommend that you read this
instruction manual carefully before
using this machine. Keep this instruction
manual and the documentation provided
with the machine for future reference.
introduction
The high pressure cleaner FHPW-200 is quick and
efficient for cleaning vehicles, machines, boats,
buildings, etc., by the removal of stubborn dirt
using clean water and chemical detergents.
When using chemical detergents, only use
biodegradable types. Only clean vehicle engines
in areas in which suitable oil traps are installed.
contents
1. Machine information
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. Machine information
Technical specifications
Voltage
Input power
Working pressure
Max. pressure water supply
Motor rotation speed
Max. water temperature
Rated flow rate
Max. working flow rate
Hose length
Weight
Dimensions
Lpa (sound pressure level)
Vibration level
contents of packing
1 High pressure cleaner
1 Hose
1 Trigger
1 Lance holder (2 pcs.)
1 Hose handle + screws
1 Lance extension
1 Lance adjustable nozzle
4
1 Detergent spray attachment
1 Safety and operating instructions
1 Warranty card
Check the appliance, any loose parts and
accessories for damage caused during transport.
product information
Fig. 1
1. Water outlet
2. Water inlet with filter
3. Main switch
4. Adjustable spray nozzle
5. Lance extension
6. Trigger with lock mechanism
7. High pressure hose
8. Detergent spray attachment
9. Lance holder
10. Hose handle
2. safety instructions
explanation of the symbols
230 V~ /50Hz
1900 W
110 bar
4 bar
2800 r/min
50º C
safety instructions
6 l/min
When using electric machines always observe the
7.5 l/min
safety regulations applicable in your country to
5 m
reduce the risk of fire, electric shock and personal
18 kg
injury. Read the following safety instructions and
83 x 31 x 41 cm
also the enclosed safety instructions.
83.5 dB(A)
electrical safety
1.0 m/s
2
•
Always check if your mains voltage
corresponds with the value on the type plate.
•
When replacing old cables or plugs:
•
Throw away old cables or plugs immediately as
soon as new ones have replaced these. It is
dangerous to put the plug of a loose cable into
the socket outlet.
•
When using extension cables:
•
Only use an approved extension cable that is
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
DO NOT direct the water jet
towards people or animals.DO NOT
direct the water jet towards the unit
itself, electrical parts or towards
other electrical
Ferm
Tabla de contenido
