Frequently Asked Questions - Blaupunkt Bluebot Manual De Instrucciones

Frequently asked Questions

Does Bluebot come with spare parts?
Yes, the box includes 2 extra bristles and an extra HEPA filter.
How do I clean the dust collection bin?
Turn off Bluebot and press the top lid labelled 'push' . Bluebot will now open, allowing you to
remove the collection bin. The top of the bin holds a small brush, which can be used to clean
the HEPA filter. Be careful: the HEPA filter must not get wet. The rest of the dust collection
bin can be emptied in the trash and (optionally) rinsed with water. Let the collection bin dry
completely before returning it to Bluebot.
The standard cleaning component with the rubber edge is used for general vacuum cleaning and should be
used in most cases. The component containing bristles has been optimized for cleaning carpets and more
excessive dirt.
How do I use the magnetic tape?
This strip is a so-called surface limiter. It can be used to prevent Bluebot from going
to specific areas in your home. To use the magnetic strip before vacuuming, place the
magnetic strip (flat side down) on the floor to block the area: the robot detects the stripes
and avoids the surface. With this you can protect something valuable, keep Bluebot within a
defined area or e.g. prevent Bluebot from driving up your carpet.
How do I use the water tank and mop?
Attach the mop using the velcro strip to the bottom of the water tank. Fill the water tank
with water and a small amount of cleaning product. Make sure the rubber cap is sealed
completely. Flip Bluebot over and attach the water tank by fitting the two small and two large
pins in the robot. Turn Bluebot back on its wheels and turn it on. The water from the water
tank will spread throughout the mop automatically.
What do I do when Bluebot will not be used for a period of time?
Completely charge the battery and store Bluebot in a dry place.