Search Channels From Satellite - Qviart mini Manual Del Usuario

You can press the RED button to add a transponder.
 Delete
Select the Transponder that you want to delete from the TP list. Then press the BLUE button.
 Edit
Press the ▲/▼ keys choose the Transponder that you want to Edit, press GREEN button to
edit.
 Delete ALL
Press the YELLOW button that you want to delete all the channels and transponders in the
satellite.

3.1.3 Search Channels from Satellite

A: Satellite Search
1. Highlight the Satellite and press the OK button to enter satellite list.
2. Complete the antenna settings of this satellite.
3. Highlight the Start Search and select satellite then press the OK button to confirm.
B: Multi-SAT Search
1. Highlight the Start Search and select Multi satellites then press the OK button.
2. Highlight the satellites in the satellite list, but make sure they are all configured to your
DiSEqC Switch before press the OK to mark them.
3. Press Exit will start searching programs of the satellites you have marked.
C: Blind Search
1. Highlight the Satellite and press the OK button to enter satellite list.
2. Complete the antenna settings of this satellite.
3. Highlight the Start Search and select Blind Search then press the OK button to confirm.
D: TP Search
1. Highlight the Satellite and press the OK button to enter satellite list.
2. Complete the antenna setting of this satellite.
3. Highlight the Transponder and press the OK button to enter TP list.
4. Highlight the Start Search and select Transponder then press the OK button to confirm.
E: Multi TP Search
1. Highlight the Satellite and press the OK button to enter satellite list.
2. Complete the antenna setting of this satellite.
3. Highlight the Start Search and select TP Search then press the OK button to confirm.
4. Highlight the transponders in the TP list press the OK to mark them.
5. Press Exit will start searching programs of the transponders you have marked.
3.1.4 Antenna Settings for Motor
Menu-> INTALLATION ->Antenna Settings->Motor
1. Motor Mode:
Select DiSEqC 1.2 or USALS using the/button.
6