User Channel List; Settings; System Settings; Osd Setup - Qviart mini Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 14
Highlight the option you want and press the OK button to sort the channel list. You can sort by 
Alphabet, Transponder, FTA To CAS, Default, Favor, FTA To CAS+ Alphabet, Provider and 
Service ID. 

4.4 User Channel List

User Channel List allows you to save or load all the data and settings. 
1. Menu->EDIT CHANNEL -> User Channel List->Save User Data
2. Menu->EDIT CHANNEL -> User Channel List->Load User Data

5. Settings

Tip: Input the default password.

5.1 System Settings

Menu->SETTINGS->System Settings
1. Menu Language: Set the menu language.
2. Audio1: Set the preferred audio language.
3. Audio2: Set the sub‐prime audio language.
4. Subtitle Language: Set the subtitle language. 
5. EPG Language: Set the EPG language. 
6. TXT Language: Set the TXT language. 
7. Scart Output:While the HDMI Mode is set to 576i or 480i mode, you can change the scart 
output mode between CVBS and RGB mode. 
8.Auto Channel Selection: If you set ON, it will play automatically the highlighted channel. If 
you set OFF, you should press the OK button to play it.  
9. Auto Exit CH List:  If  you  set  ON,  it  will  disappear  when  you  press  OK  on  a  Highlighted 
channel. If you set OFF, the channel list will disappear. 
10. Recall List: If you set ON, when you press Recall button of RCU you can get the recall list. 
If you set OFF, you can go back to the last program you have selected. 
11. Low Power Standby: If you set ON, when standby the power consumption is lower. If you
set OFF, when standby the power consumption is same as power on. 
12.Front Panel Light: Set the brightness of the LED.
13.Network auto update: set network auto update or not. 

5.2 OSD Setup

Menu->SETTINGS->OSD Setup 
1. Menu Transparency: Set the transparency of all menus. 
2. TXT Transparency: Set the transparency of teletext. 
3. Display Mode: Set the HD format between 1080p, 1080i, 720p, 576i or 576p. 
4. TV Type: Set the TV Type on PAL/NTSC/Auto state.
5. Screen Mode: Set the display format according to the screen ratio.
9
Tabla de contenido
loading

Tabla de contenido