Installation; Antenna Settings - Qviart mini Manual Del Usuario

3. Installation

You should install the receiver when powering on your product for the first time after
purchase.
Tip: The default password is 0000. If you have forgotten your password, please contact your
local product distributor.

3.1 Antenna Settings

Antenna Settings allows you to configure the antenna setting parameters.
Menu->INTALLATION->Antenna Settings
1. Satellite: Highlight the satellite you want to search.
2. Transponder (TP for short): Press the / button to change the TP.
3. LNB Type: Press the / button to change the LNB frequency.
4. LNB Power: Press the / button to select the required LNB power.
5. 22kHz: Press the / button to select ON, OFF or Auto.
6. DiSEqC 1.0: Press the / button to select the required DiSEqC1.0 input.
7. DiSEqC 1.1: Press the / button to select the required DiSEqC1.1 input.
8. Motor: Press the / button to select DiSEqC1.2 or USALS.
9. Scan Mode: Press the / button to select the scan mode you want to implement.
10. Start search: Press the / button to select Satellite & Multi‐Sat & Blind scan &
Transponder & Multi‐Transponder which you want to start search.
3.1.1 Antenna Settings for Satellite
Select
Press the ▲/▼ keys choose the satellite that you want to use.
Add
Press RED button to add a new satellite.
Move
You can select the satellite that you want to move from the satellite list by pressing the BLUE
button, then input the destination number and press OK.
Delete
Select the satellite that you want to delete from the satellite list. Then press the GREEN
button.
Rename
You can press the YELLOW button to change the satellite name. When the keyboard popup,
you can select the character which you want to edit the name.
3.1.2 Antenna Settings for Transponder
Select
Press the ▲/▼ keys choose the Transponder that you want to use, and then press OK to
confirm the setting.
 Add
5