Setting The Program Start Time(S); Eliminating A Program Start Time; Setting Station Run Times; Setting Days To Water - Hunter X-CORE Manual Del Usuario

Ocultar thumbs Ver también para X-CORE:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 68
PROGRAMMING THE CONTROLLER

Setting the Program Start Time(s)

1. Turn the dial to the START TIMES position.
2. The factory preset is set on program A. If
necessary, you can select program B, or C
by pressing the
button.
3. Use the
or
button to change the start
time. (The start times advance in 15 -
minute increments).
4. Press the
button to add an additional start time, or
for the next program.
NOTE: One start time will activate all stations sequentially
in that program. This eliminates the need to enter each
station's start time. Multiple start times in a program can be
used for separate morning, afternoon, or evening watering
cycles. Start times may be entered in any order. The X-Core
will automatically sort them.

Eliminating a Program Start Time

With the dial set to START TIMES position,
push the
or
button until you reach 12:00
AM (Midnight). From here, push the
once to reach the OFF position.
Press the right arrow to eliminate a second
start time.
START TIMES
button
START TIMES
button

Setting Station Run Times

1. Turn the dial to RUN TIMES position.
2. The display will show the last program
selected (A, B, or C), the station number
selected,
icon, and the station will
be flashing. You can switch to another
program by pressing the
3. Use the
or
button to change the station run time on the display.
You can set the run times from 0 to 4 hours.
4. Press the
button to advance to the next station.

Setting Days To Water

1. Turn the dial to the WATER DAYS position.
2. The display will show the last program
selected (A, B, or C). You can switch to
another program by pressing the
3. The controller will display the seven days of the week (MO, TU,
WE, TH, FR, SA, SU). Each day will have a icon or a
ve the day. The icon would represent an "On" water day, while a
icon would represent an "Off" watering day.
Selecting Specific Days of the Week
to Water
1. With the cursor on a specific day (the
cursor will always start with MO), press
the
button to activate a particular day of the week to water.
Press the
button to cancel watering for that day. After pressing a
button the cursor automatically advances to the next day.
2. Repeat step 1 until all desired days have been selected.
The selected days will show a to indicate their status is ON. The
last is the last day of watering for that program.
RUN TIMES
button.
button.
icon abo-
EN
WATER DAYS
21

Hide quick links:

Tabla de contenido
loading

Tabla de contenido