Uline H-9299 Manual De Instalación página 6

Auto-On Timer: When unit is off, it can be set to
automatically turn on in 1-24 hours at previous set mode
and fan settings. To set Auto-On Timer, press the "Timer"
button on the unit or remote control. Timer can be set in
one-hour increments. (See Figure 15)
Auto-Off Timer: When unit is on, it can be set to
automatically turn off in 1-24 hours. To set Auto-Off Timer,
press the "Timer" button on the unit or remote control.
Timer can be set in one-hour increments. Once timer is
set, Timer On/Off indicator and the set temperature on
control panel will light up. Press "Timer" button to see
remaining time. To change timer settings, use the Timer
Set buttons on control panel or remote control. During
preview of timer setting, press "Timer" button once to
display set time. Press button one more time to cancel
settings. (See Figure 15)
Figure 15
HIGH
LOW
QUIET
SPEED TEMP/TIME
AUTO
COOL
MODE
SLEEP
DRY
MODE
ENERGY
FAN
SAVER
MODE
PAGE 6 OF 33
CONTROL PANEL CONTINUED
TIMER
ON/OFF
TEMP/TIME
HIGH
Timer Set
LOW
QUIET
SPEED TEMP/TIME
Energy Saver Mode: Press the "Mode" button to turn
on Energy Saver mode. In this mode, set desired
temperature and unit will turn off once room is cooled
to that temperature (the fan will also be off). Unit will
turn back on when room temperature rises above set
temperature. Fan will cycle on and off automatically to
save energy. (See Figure 16)
Filter Reset: Press the "Filter Reset" button to reset
the filter light. Light will illuminate every 250 hours of
operation as a reminder to clean filter. (See Figure 17)
CHECK
FILTER
DELAY TIMER FILTER RESET
TIMER
ON/OFF
TEMP/TIME DELAY TIMER
Figure 16
AUTO
COOL HIGH
MODE
SLEEP
DRY LOW
MODE
ENERGY
FAN QUIET
SAVER
MODE
Mode
Figure 17
POWER
CHECK
FILTER
FILTER RESET
Filter Reset
SPEED TEMP/TIME
POWER
0321 IH-9299