Safety Instructions - LEGRAND 6 946 25 Manual Del Usuario

2
Configuration of WIFI access point function
6 - Select DHCP.
7 - Wait for a few seconds while the reboot takes place (progress bar reaches 100%).
Rebooting, please wait...
8 - The configuration process is now complete. You can now connect your wireless terminals to the new network.
Note: If you change the network name and/or the password, you will need to connect to this new network via
your wireless utility.

Safety instructions

This product should be installed in compliance with installation rules, by a qualified electrician. Incorrect installation
and/or incorrect use can lead to risk of electric shock or fire.
Before carrying out the installation, read the instructions and take account of the product's specific mounting
location.
Do not open up, dismantle, alter or modify the device except where specifically required to do so by the
instructions. All Legrand products must be opened and repaired exclusively by personnel trained and approved by
Legrand. Any unauthorised opening or repair completely cancels all liabilities and the rights to replacement and
guarantees.
Use only Legrand brand accessories.
The directive 1999/5/CE of the european parliament and of the council of March 9th, 1999
On condition that they are used in the manner intented and/or in accordance with the current installation standards
Channel availability depends on local country regulations. Wireless LAN system administrator must choose correct
Channels are then automatically configured to comply with specified country's regulations.
These provisions are ensured for directive 1999/5/CEE by conformity to the following standards:
IEC 60884-1 - NFC 61-314 - IEC 61643-1 - IEC 61643-21 - IEC 60950 - IEEE 802.11 b/g/n
For more information, please visit www.legrand.com
CONFORMITY
We declare that the products satisfy the provisions of:
and/or with the manufacturers recommandations.
country of operation.
(cont)
You may change the name of your
Wireless internet access point and/or the
password (min. 8 characters) or leave the
default values.
Then click Apply.
DECLARATION
66%