Function Keys - Terraillon TONIC 3 Modo De Empleo

■
INSTRUCTIONS FOR USE
• Make sure the appliance is unplugged.
• Fill in with water.
• Plug in and select required function.
• Sit down and place feet in foot Jacuzzi.
• To empty: turn the appliance off (O position), unplug and
empty water through the appropriate aperture.
• Clean with a damp cloth. Do not use chemical or abrasive
products. Wipe carefully.
■

FUNCTION KEYS

Liquid crystal display (LCD) screen
Appliance on/off key
Infrared heat on/off key
Water temperature regulator
Vibrations & water-heating
on/off key
Bubbles & water-heating
on/off key
NB: Green diodes indicate what functions and programmes
have been activated.
First fill the appliance with water then plug in. The red on/off
diode lights up. Press the appliance's "on" key. The red diode turns
to green.
Select the required functions by pressing the appropriate key(s).
Green diodes light up according to the functions you have
chosen. The LCD screen uses small arrows to indicate what
functions have been activated.
In this example, the arrow indicates that the bubble function has
been activated.
Infrared heat:
Press the key once to activate infrared heat. Press once more
to de-activate.
9
RELAXING FOOT JACUZZI WITH INFRARED HEAT AND BUBBLES RELAXING FOOT JACUZZI WITH INFRARED HEAT AND BUBBLES
Directions for use and guarantee Directions for use and guarantee
Water temperature:
The temperature range is 30°C - 40°C. Press the "Water
temperature" key to adjust the temperature. The LCD screen will
display the selected temperature.
You can readjust the temperature using the [ ▲ ] or [ ▼ ]
buttons on the remote control. During the time it takes for the
appliance to reach the required temperature, the temperature
figures on the LCD screen flash on and off. The figures stop
flashing when the required temperature has been reached.
Caution: the water-heating function only becomes
operational when the bubble or vibration function has been
activated.
Vibrations:
Press once to activate programme 1 (P1). Press again to activate
programme 2 (P2). Press again to activate programme 3 (P3).
Press once more to de-activate vibration function.
Bubbles:
Press once to activate programme 1 (P1). Press again to activate
programme 2 (P2). Press again to activate programme 3 (P3).
Press once more to de-activate bubble function.
Explanation regarding the different programmes 1, 2 and 3
in vibration and bubble functions:
Programmes P1, P2, P3 for vibrations or bubbles are defined as
follows:
Program 1: normal cycle
Maximum bubble and vibration strength
Program 2: alternating cycle
Alternating bubble and vibration strength
Program 3: random cycle
Random bubble and vibration strength
Foot Care Mode
Attach one of the rotary foot care accessories to its appropriate
fixture. Press down on the accessory with your foot; the accessory
will begin to turn. Lift foot off the accessory and the accessory will
stop turning.
EN