Before Use - Rowenta IS6300 Manual De Instrucciones

Ocultar thumbs Ver también para IS6300:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
- Do not cut or attempt to extend the steaming hose.
- To prevent the appliance over heating, when you hang the clothes on the garment hook for
removing creases, please assemble the attached garment telescopic handle and extend it
to its highest position.
Environmental protection first!
Your appliance contains valuable materials which can be recovered
or recycled.
When disposing of it, take it to a local civic waste collection point.
DESCRIPTION
1.
Steam head
2.
Steam head hook
3.
Built in hanger
4.
Rotary trouser/dress clips
5.
Hanger holder
6.
Roll & press system: vertical support
panel
7.
Roll & press system: rolling and
locking handle
8.
Roll & press system: locking hook
9.
Hanger fastening screw
10.
Pole locking clips
11.
Telescopic pole
12.
Electric cord holder

BEFORE USE

Pole assembly
1. Unscrew the fastening screw on the base of the pole (fig. 1).
2. Hold the pole such that the cord holder is on the left. Check that the 2 pole clips are
unlocked (fig. 2).
3. Insert the pole into the base by pressing downwards until the holes of the pole and
base are at the same level, so that you can put the screw back. If the holes are not
aligned, check that the clips of the pole are well and truly unlocked (fig. 3).
4. Screw the pole fastening screw back in as far as it will go so that the pole is firmly
fixed to the base (fig. 4).
5. Adjust the pole to its maximum height by sliding it upwards (fig. 5) then locking the 2 clips
(fig. 6). Make sure the 3 segments of the pole are fully extended.
Hanger with Roll & Press system assembly
1. Unscrew the hanger fastening screw at the bottom of the hanger (fig. 7).
2. Hold the hanger such that the Roll & Press system handle is on the same side as the locking
hook.
3. Insert the hanger vertically on the top of the pole. The holes at the bottom of the hanger and
in the pole should be at the same level (fig. 8).
13.
Electric cord
14.
Velcro strip
15.
Pole fastening screw
16.
Steam hose connector
17.
Removable water tank
18.
ON/OFF pedal
19.
Transport wheels
20.
Textile steam hose
21.
On/ off light
22.
Built in accessories
a.
Fabric brush
b.
Lint pad
c.
Delicates steam cap
12
Tabla de contenido
loading

Tabla de contenido