Troubleshooting; Technical Specifications; Electrical Wiring - Buffalo GH124 Manual De Instrucciones

UK

Troubleshooting

Fault
Appliance not working The unit is not switched on
Plug or lead is damaged
Fuse in the plug has blown
Power supply
Appliance does not Faulty thermostat
reach set temperature
Faulty element
Build-up of fat on the element
Appliance heats up Indicator light has expired
but indicator light
does not come on
Power indicator Faulty element
light comes on but
appliance does not
Faulty thermostat
heat up
Thermostat set incorrectly
Appliance slow to Faulty element
heat up
Build-up of fat on the element
No power Thermal cut-out activated
Oil overheats or starts Thermostat damaged
to smoke

Technical Specifications

Model Voltage
GH124 230V, 50Hz
GH125
230V, 50Hz
GH126 230V, 50Hz
GH127 230V, 50Hz

Electrical Wiring -

GH124/GH125
This appliance is supplied with a 3 pin BS1363 plug
and lead.
The plug is to be connected to a suitable mains
socket.
This appliance is wired as follows:
• Live wire (coloured brown) to terminal marked L
6
GH124-GH124-GH124-GH124_ML_A5_v4_20211026.indb 6 GH124-GH124-GH124-GH124_ML_A5_v4_20211026.indb 6
Probable Cause
Capacity
Power
(litres)
2900W 8L
2 x 2900W 2 x 8L
6000W 8L
2 x 6000W 2 x 8L
•
•
This appliance must be earthed.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of
any obstructions. In the event of any emergency
disconnection being required they must be readily
accessible.
Solution
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Clean the appliance
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Call BUFFALO agent or qualified technician
Check thermostat
Call BUFFALO agent or qualified technician
Clean the appliance
Please check your machine is safe with no
obvious damage and then press the re-set
switch
Switch Off immediately. Call BUFFALO agent
or qualified technician
Max batch Dimensions
load (kg) H x W x D mm
1 452 x 283 x 595
2 x 1 452 x 550 x 595
1 452 x 283 x 595
2 x 1 452 x 550 x 595
Neutral wire (coloured blue) to terminal
marked N
Earth wire (coloured green/yellow) to terminal
marked E
Weight
9.9kg
20.8kg
10.9kg
21.8kg
2021/10/26 14:28 2021/10/26 14:28