Avermedia F200 Manual Del Usuario página 10

Quick Instillation Guide
5 Network Setup Instructions
5.1 IP Setup
If you connect the device to the computer via the High-Speed Ethernet Cable (Connection A
in 2.2) or via the network hub but without outside network connection (Connection C in
2.2), please follow the steps below to finish the IP setup.
1. Open HomeFree Setup Tool and choose
Network Config. tab.
2. Select Static IP option.
3. Enter the values below:*
IP : 2 · 3 · 4 · 5
Netmask : 255 · 255 · 255 · 0
Gateway : 2 · 3 · 4 · 6
*If you simultaneously use a second AVerMedia HD
HomeFree Duet, enter the IP values of the second device as
2 · 3 · 4 · 8
4. Click Apply.
5. Then, click the Start button and choose
Control Panel.
6. Double-click on the Network Connections
icon .
7. Double-click on the Local Area Connection
icon (the main network connection you
are using).
8. Choose Properties.
9. Double-click on the Internet Protocol
(TCP/IP).
10. Select Use the following IP address and
enter the values below*:
IP address : 2 · 3 · 4 · 7
Subnet mask : 255 · 255 · 255 · 0
Default gateway : 2 · 3 · 4 · 6
*If you simultaneously use a second PC/Notebook, enter the
IP values of the second PC/Notebook as 2 · 3 · 4 · 9
11. Click OK.
5.2 DHCP Setup
If you connect the device to the computer via the network router (Connection B in 2.2) or via
the network hub with outside network connection (Connection C in 2.2), please follow the
steps below to finish the DHCP setup.
All manuals and user guides at all-guides.com
English-6