Assembly - Sera MU-037300 E 187.2 Manual De Instrucciones

Electric agitator
MU-037300 E 187.2
MU-055450 E 114.2 / MU-075550 E 094.2
Operating instructions

7.1 Assembly

Install the electric agitator vertically into the tank.
The electric agitator may only be mounted in
an empty tank.
Insert the oblique blade agitator through
■
the tank opening and pull it onto the agitator shaft.
Fasten the oblique blade agitator onto the agitator shaft
■
with the threaded pins.
Agitator shaft
2 persons are required for mounting the agitator shaft in the
drive.
Pull the agitator shaft through the bore.
■
The drive is held by one person, the second person inserts
■
the agitator shaft through the drive and locks it with
a locking ring.
Put the drive at the defined position on the threaded bolt
■
and fasten.
Observe the required tighening torques:
Then screw down the protective cover of the drive.
■
.
48
www.sera-web.com
Oblique blade
agitator
Threaded pin
Nut
M6
Subject to technical modifications!
Drive motor
Protective
cover
Locking ring
Nut
Washer
Agitator shaft
Threaded bolt
Tightening torque
Nm
3,5
TA 504 Rev. 3 en 11/2021