Idiomas disponibles
Idiomas disponibles
Parts list
1. Ceramic soleplate
2. Base
3. Spray nozzle
4. Housing
5. Water filler
6. Steam button
7. Spay/ burst button
8. Power cord
9. Cord guard
10. Rear cover
11. Top cover
12. Power indicator light
13. Water tank
14. Temperature knob
15. Self clean knob
Important points before using the iron
•
Do not allow the cord to touch hot surfaces. Make sure the iron is completely cooled down before
putting away.
•
Burns can occur from torching hot metal parts, hot water or steam. Use caution when you turn a
steam iron upside down, there may be hot water in the reservoir.
•
If the iron is not operating normally, disconnect it from the power supply and contact the nearest
authorized service agent.
•
Your iron is designed to rest on the heel. Do not leave the iron unattended when switched on. Do not
place the iron on an unprotected surface even if it is on its heel rest.
•
Keep the base very smooth. Do not run it over metal objects (buttons , zips ,etc.)
•
Certain parts of the iron have been lightly greased, therefore the iron could smoke a little when
plugged in for the first time. This will stop after a short while.
•
Remove the plastic protector from the base(if it has one) clean the base with a soft cloth.
