TECshow POWER DERBY Manual De Usuario página 6

DMX address setting
Each fixture must set a specific starting address. When re-
ceiving signal transmission, fixture will receive channel con-
trol signals which from the starting address.
According to different requirements or easy to use, the user
can set many value fixtures to the same address, also can set
up a separate address for every device.
If you set the same address,all the devices will receive from
DMX channels signal. All connecting fixtures are jointly con-
trolled, controller can't separate control a device.
If you set a different address, each device will be separate
from its particular set the starting address and begin accept-
ing DMX512 control signal, so that more convenient separate
control one device.
Using this method must be based on channel quantity of de-
vice to determine a starting address.
This light has 8 channels. When you use 8CH, you should set
the starting address of the first unit to 1, the second unit to
9(8+1), the third unit to 17 (16+1), and so on.
POWER DERBY
ENGLISH VERSION
p. 6