Steelcase Cura II Instrucciones De Montaje página 2

®
HEALTH
1.
Place worksurface on a clean, scratch resistant surface. Place
legs onto underside of table aligning holes in legs with holes on table.
Secure using four (4) screws for each leg.
2.
Install glides into legs by first installing the glide plug. Set the
glide on top of the glide plug and secure using one (1) screw.
Repeat this procedure for the three (3) remaining legs.
LEG
SCREW
1
2
SCREW
GLIDE
GLIDE
PLUG
LEG
Page 2 of 6
939549937 Rev C