Eu Declaration Of Conformity - Bartec Mobile X Guia De Inicio Rapido

ENGLISH
INTRODUCTION
This document contains information and safety regulations which are to be observed
without fail for safe operation of the device Mobile X under the described conditions.
Non-observance of this information and instructions can have serious consequences
and/or may violate regulations.
Please read the manual and these safety instructions before using the device.
In case of contradicting information, the text of these safety instructions shall apply.
In case of any doubt, the German version shall apply.
The current EU declaration of conformity, certificates, safety instructions and manuals
can be found at www.bartec.de, or requested from BARTEC GmbH.
RESERVATION
Technical Data is subject to change without notice. Changes, errors and misprints may
not be used as a basis for any claim for damages. All rights reserved.
BARTEC GmbH cannot be held responsible for any data or other loss and direct or
indirect damages caused by any improper use of this phone.
EX-SPECIFICATIONS
The Mobile X device is suitable for industrial use in potentially explosive atmospheres
under zones 1, 2, 21 and 22 in accordance with directives 2014/34/EU and 2014/53/EU
as well as the IECEx scheme.
EX-MARKINGS
ATEX:
II 2G Ex ib IIC T4 Gb
II 2D Ex ib IIIC T135°C Db IP6X
EU Type Examination Certificate:
EPS 16 ATEX 1 144 X
CE-designation:
IECEx:
Ex ib IIC T4 Gb
Ex ib IIIC T135 °C Db IP 6X
IECEx Certificate: IECEx EPS 16.0060X

EU DECLARATION OF CONFORMITY

The EU declaration of conformity can be found at the end of this manual.
FAULTS AND DAMAGES
If there is any reason to suspect that the safety of the device has been compromised, it
must be withdrawn from use and removed from any ex-hazardous areas immediately.
Measures must be taken to prevent any accidental restarting of the device.
4
2004
Temperature range:
-20 °C ... +60 °C
Manufactured by:
i.safe MOBILE GmbH
i_Park Tauberfranken 10
97922 Lauda-Koenigshofen
Germany