Tabla de contenido
ERROR CODES
If there is an error, error code will be showed at heater displays.
E1 : Cooling Fan is disabled, call authorized service agents.
wait
E3 : Supply coltage is over than rated values, turn the hob off by touching
,
until "H" disappears for all zones, turn the hob on by touching
and continue
to use. If same error is seems again, call authorized service agents.
E4: Supply frequency is different from rated values, turn the hob off by touching
, wait until "H" disappears for all zones, turn the hob on by touching
and continue to use. If same error is seem again, plug off/on turn the hob on by
touching
continue to use it.Ýf same error is still seem call authorized service
agents.
E5: Hob inside temperature is too high, turn the hob off by touching
let
heaters cool down.
E6: Communication error between touch control and heater, call authorized
service agents.
E7: Coil temperature sensor is disabled, call authorized service agents.
E8: Cooler temperature sensor is disabled, call authorized service agents.
E9: Calibration error, call authorized service agents.
Capítulos
Tabla de contenido
