installation
Position
Several factors must be borne in mind
when choosing the installation position:
in order for the appliance to record the at-
mospheric temperature correctly, it must be
positioned well away from sources of heat
(radiators, direct sunlight, fi replaces, etc.)
and from draughts, doorways and windows,
etc. as these may infl uence the temperature
readings.
It should be installed approximately 1.50
metres above the fl oor level.
Attention
Before wiring the thermostat, make sure that
the power supply of the unit to be control-
led (furnace, pump, etc.).
Installation
The installation and position the chronoter-
mostat have eff ected from personal quali-
fi ed.
• To open completely the cover, two un-
screw screw of fi xing in the vain batteries
(fi g. A).
• With a light pressure, to separate the
base of the chronotermostat inserting a
screwdriver in the crack posts in the lower
part (fi g. b).
• Fix the chronotermostat base to the wall,
in the chosen point, using the screws sup-
plied in the kit. (fi g. c)
fi g. a
fi g. b
fi g. c
GB
21