How To Connect The Drain Hose; Calibration Mode (Only Digital Inverter Motor) - Samsung WA19R7L6DD Serie Manual Del Usuario

installation & maintenance

HOW TO CONNECT THE DRAIN HOSE

IN CASE OF PUMP-DRAINED WASHER
Be sure to join tlghtly the drain hose into the drain-
outlet on the side of the machine.
The drain hose has to be arranged vertically at 90°
to the base.

CALIBRATION MODE (ONLY DIGITAL INVERTER MOTOR)

Your Samsung washing machine detects the laundry weight automatically.
For more accurate weight detection, please run Calibration Mode after the installation.
To run Calibration Mode, follow these steps:
1. Remove laundry or any contents in the machine.
2. Press the Delay End and Spin buttons simultaneously, and then press the Power button. The Machine
turns on with "Cb"
3. Press the Start/Pause button to activate "Calibration Mode".
4. The drum rotates for approximately 4 minutes.
5. When "Calibration Mode" is fi nished, "End" appears on the display, and the machine automatically
turns off. The washing machine is now ready for use.
18_installation & maintenance
F700S_DC68-03271Q-00_EN.indd Sec6:18 F700S_DC68-03271Q-00_EN.indd Sec6:18
Verify that the retaining ring stay in his correct
position.
Drain hose
Hose guide
Install the drain hose in the position of about
90~100 cm above the ground. The end of the drain
hose can not be sinked under water.
6/25/2019 12:06:41 PM 6/25/2019 12:06:41 PM