Care And Cleaning - LUND AVS Ventvisor Instrucciones De Instalación

Installation Steps
4 piece Set
Install the rear visors using the same methods as the front visor, with the exception of the rear
end flange. Using a flathead screwdriver install C1 clips at end of visor flanges to compress
8
NOTE: It is necessary to both hold the visor up into the window channel AND pull the bottom of the visor slightly
If the visor does not seat correctly, roll down window and repeat Step 8.
9

Care and Cleaning

• Wash only with mild soap & dry with a clean cloth.
Congratulations!
You have purchased one of the many quality Auto Ventshade™ branded products offered by Lund International. We take the utmost
pride in our products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your
product is top quality in terms of fit, durability, finish and ease of installation.
Auto Ventshade™, the Auto Ventshade™ logo and the AVS™ logo are trademarks of Lund, Inc.
™
NOTE: Actual application may vary slightly from illustrations.
visor into rubber window channel.
Slide rear
flange under
clip
C1
clip
outward while raising the glass to seat visor properly.
Repeat Steps 1 thru 9 for passenger side.
Lund International
800-241-7219 • Visit us at lundinternational.com
© 2020 Lund, Inc. All rights reserved.
clip
The material that your product is made from can
be recycled. Please also consider recycling the
Page 3 of 3
packaging that your product came in.