Idiomas disponibles
Idiomas disponibles
Preliminary checks and fixing the gear motor
Check that the gate structure is sufficiently sturdy and there are no points of friction.
Make sure the gate hinges are working properly and adequately lubricated.
Check there are mechanical stops in closing and opening.
Prepare for fixing the gear motor to the gate as illustrated in figure 1.
Fixing the brackets to the post and gate
Once you have verified the optimum conditions for placing the plates and their alignment (fig. 2),
fix them definitively to the post and gate, either welding them or using expansion bolts (on
masonry posts).
Istruzioni Instructions Anleitungen Instructions istrucciones
D
Figure 1
A
- 11 -
