Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Rail
1. Prepare the Cabinet
IMPORTANT! Before installing this sink, verify that the distance to
the top of the doors (A) is greater than the apron height.
Remove the false drawer front from your cabinet. Use care not to
damage the cabinet.
TIP: Apply painter's tape to the cabinet to mark cuts and protect the
cabinet surface when cutting.
If your cabinet has a center support, cut along the bottom of the
support even with the drawer opening.
Remove and discard the rail.
Measure and mark 7/8" (22 mm) in from the outside edge of the
cabinet. Repeat for the other side.
Cut the cabinet along the marked lines.
Kohler Co.
6-11/16"
(170 mm)
Apron
A
3
7/8"
(22 mm)
1400422-2-A
Tabla de contenido
