HURAKAN HKN-HBH850 PRO Introducción página 10

EN
1) This equipment has the overload protection switch in the bottom part of the base. Power
supply is automatically interrupted in case of the motor overload. Please check the blender jar
for foreign objects or ingredients that might hinder the blade's operation, and remove them.
Next, press the overload switch to return the equipment into the operating condition.
2) Make sure the power cable is properly connected to the blender.
3) If troubleshooting fails, address the problem the authorized service center.
SAFETY
1. In case there are hot ingredients and liquids in the blender, the jar shall be filled at 750 ml
maximum, the plug shall be removed from the opening not to obstruct the steam bleeding. It
is recommended to start food grinding and mixing at the lowest speed.
2. The equipment shall be powered off prior to disassembly and cleaning.
3. Touching the motion parts is prohibited.
4. The equipment is not intended for outdoor use.
5. Use the equipment with the cover only.
6. Extended mixing/grinding time may result in mix warming in the blender.
7. Every time installing the jar check its contact with the base.
8. Never leave the operating equipment unattended.
10