Important Safety Instructions - Hydor Koralia Serie Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13
Important safety
WarnInG - To guard against injury, basic safety precautions should be
observed, including the following:
read and folloW
all safety InstructIons
danGer - To avoid possible electric shock, special care should be taken
in the use of aquarium equipment. For each of the following situations,
do not attempt repairs yourself; return the appliance to an authorized
service facility for service or discard the appliance.
A) If the appliance shows any sign of abnormal water
1.
leakage, immediately unplug from the power source
B) Carefully examine the appliance after installation. It should not
be plugged in if there is water on parts not intended to be wet.
C) Do not operate any appliance if it has a damaged cord or plug,
or if it is malfunctioning or if it is dropped or damaged in any
manner. Inspect power cord insulation to be sure there are no
cuts or exposed wire. If so, discard and order a new replacement.
D) To avoid the possibility of the appliance plug or receptacle getting wet,
position aquarium stand and tank to one side of a wall mounted
receptacle to prevent water from dripping onto the receptacle or
plug. A "drip loop", shown in the Figure at right, should be arranged
by the user for each cord connecting an aquarium appliance to a
receptacle. The "drip loop" is that part of the cord below the level
of the receptacle or the connector if an extension cord is used, to
prevent water traveling along the cord and coming in contact with
the receptacle. If the plug or receptacle does get wet, DON'T unplug
the cord. Disconnect the fuse or circuit breaker that supplies power
to the appliance. Then unplug and examine for presence of water in
the receptacle.
Close supervision is necessary when any appliance is used by or near
2.
children.
To avoid injury, do not contact moving parts or hot parts such as heaters,
3.
reflectors, lamp bulbs, etc.
Always unplug an appliance from an outlet when not in use, before
4.
putting on or taking off parts, and before cleaning. Never yank cord to
pull plug from outlet. Grasp the plug and pull to disconnect.
Do not use an appliance for other than intended use. The use of
5.
attachments not recommended or sold by the appliance manufacturer
may cause an unsafe condition.
Do not install or store the appliance where it will be exposed to the
6.
weather or to temperatures below freezing.
Make sure an appliance mounted on a tank is securely installed before
7.
operating it.
2
InstructIons
Tabla de contenido
loading

Tabla de contenido