Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ASSEMBLY
CAUTION:
•
Always be sure that the tool is switched off and
the battery cartridge is removed before carrying
out any work on the tool.
Disposing of Dust
CAUTION:
•
Empty the cleaner before it becomes too full, or
the suction force weakens.
•
Be sure to empty out the dust inside the cleaner
itself. Failure to do so may cause the sponge
filter to be clogged or the motor to be damaged.
•
Never throw away the dust stopper because it
should be used whenever either the dust bag or
the paper pack is used.
1
2
► 1. Front cover 2. Button
1.
Push the button to open the front cover. Opening
it until a click is heard allows a positive stop at that
position.
► 1. Front cover 2. Front cover joint
NOTE:
•
The cleaner is constructed in such a way that
the front cover comes off when trying to force
the front cover open at the angle of more than
90°. If the front cover comes off, insert it into the
front cover joint in place.
1
2
7 ENGLISH
CAUTION:
•
When closing the front cover, be careful not to
pinch your fingers.
1
► 1. Dust stopper
2.
Pull out both the orange-colored dust stopper and
dust bag together at the same time.
1
► 1. Dust stopper
3.
Remove the dust stopper and empty the cleaner.
Dust bag and paper pack
Install either dust bag or paper pack before using
cleaner.
Use the dust stopper when installing either dust bag or
paper pack.
The dust bag can be used repeatedly by cleaning it out.
Paper pack is a throw-away type. Throw away the entire
paper pack without emptying when it has become full.
Tabla de contenido
