TEFAL 92040 Manual De Instrucciones página 4

5
Fill the kettle with the required amount
of water.
6
Place the kettle on its base.
Connect to the mains.
7
Turn it on using the switch or the trigger
handle. The kettle will turn itself off
automatically when the water is boiling.
8
Check that the kettle has stopped
automatically or turn it off manually
before removing it from the base to pour
the water.
You can fill the kettle
through the spout to
keep the filter in good
condition.
At the very least, cover
the heating element (or
the bottom of the kettle)
with water.
• Never fill the kettle
when it is on its base.
• Do not fill it above the
max. level or below the
min. level. If the kettle
is overfilled, boiling
water may escape.
• Do not use without
water.
• Check that the lid is
closed properly to avoid
steam near the handle.
Check that the
electrical supply is
compatible with the
power and voltage
indicated beneath your
model.
• Only plug the kettle
into a socket with a
built-in earth
connection.
• Never lift the lid
whilst the water is
boiling.
• Do not lift the kettle
by the lid, especially if
it is full of water.
The first two or three
times that you use the
kettle, throw the water
away because it may
contain foreign
particles.
Rinse the kettle and
filter separately.