Mounting the pole
foot on the mounting
plate 85999MGO
If you would like to mount the Goliath
5 ˣ 5 on the base plate 85999MGO, you
will find the following in the packaging:
Please note: We recommend having
a specialist company pour a sufficient-
ly large and heavy base for the base
plate 85999MGO (60 ˣ 60 cm; depth:
60 cm).
1. Dig a hole of sufficient size and depth
(see figure G).
2. Have a specialist company pour a suf-
ficiently large and heavy base (see
figure M).
At the same time, include a drain-
age layer and a protective tube for the
electrical lines in the planning.
3. Set the mounting plate down and (e.g.
with a pencil) mark the position of the
8 holes 11 (see figure N).
4. Use a suitable drill to drill the dowel
holes and clean them (with a vacuum
cleaner). Then insert the heavy-du-
ty anchors 12 into the holes (see fig-
ure N).
5. Secure the mounting plate with wash-
ers 13 and the nuts 14 (see figure N).
6. Pull the shade mast with the pole foot
horizontally onto the mounting plate
so that the two smaller holes 2 are
over the corresponding holes on the
mounting plate (see figure O).
195323 i 20170919.indd 9
195323 i 20170919.indd 9
7. Put the washers 6 and snap rings 5 in
place and screw the size 12 hexagon
socket screws 4 tight with a size 10
hex key (see figure O).
8. Erect the shade mast with the pole
foot (see figure P).
Please note: We recommend hav-
ing at least 2 other people help you
erect the shade mast.
9. Put the washers 9 and snap rings 8 in
place and screw the size 16 hexagon
socket screws 7 tight with a size 14
hex key (see figure Q and R).
Warranty
The warranty period for this product is
24 months.
If you discover a defect during this time,
please consult your vendor. To ensure
that the vendor is able to promptly assist
you, please have your sales slip ready
and specify the model name and article
number.
The warranty does not cover:
– Damage attributed to normal wear
and tear;
– Damage caused by improper use;
– Damage due to structural modifica-
tions to the product.
Service
Dear customer,
Although our products are subject to
an in-depth final inspection prior to be-
ing shipped out, it is possible that an ac-
cessory is missing or that a part sustains
damage while in transit. In such a case,
please contact our hotline and provide us
with the model name and article number.
GB
11
19.09.2017 12:11:17
19.09.2017 12:11:17