Care And Maintenance - iHealth Air Manual De Funcionamento

USING WITHOUT SMART DEVICE
After it has been used for the first time, the date and time of the Pulse Oximeter PO3M
will be synchronized with your device. It can also be used without being connected to
an smart device. In this case, the measurement data is stored in the memory and can be
uploaded to the app when the connection is re-established. The Pulse Oximeter PO3M
can store up to 100 measurements. When the memory is full, any new measurement
overwrites the oldest ones.

CARE AND MAINTENANCE

1. Clean the device once per week or more frequently if handled by multiple users.
2. Wipe the device with a soft cloth dampened with rubbing alcohol to avoid cross
infection. Do not pour the alcohol directly on or into the device. Dry with a soft
cloth, or allow to air dry.
3. Avoid dropping this device on a hard surface.
4. Do not immerse the device in water or other liquid, as this will result in damage to
the device.
5. If this device is stored below 0℃, please acclimate the device to room temperature
before use.
6. Do not try to disassemble this device.
7. The PO3M is a precision electronic instrument and must be repaired/serviced by an
accredited iHealth service center.
8. Incorrect replacement of battery by inadequately trained personnel could result in
an unacceptable risk (e.g., excessive temperatures, fire or explosion).
9. The patient simulator « Index 2 », made by the Fluke company, can be used to verify
operation of the oximeter.
10.The expected service life of the PO3M is about 5 years.
9