Electrical Connection; Use - Vitrifrigo FG10I WMFE Manual De Instrucciones

7.3

Electrical connection

The FG10I WMFE refrigerator is equipped with a IEC connection socket and a main power switch on
the back panel.
The power cord with Schuko plug (CEE 7/7) is supplied with the refrigerator.
Before connecting the refrigerator to the main electrical line, make sure that the supply has the
same characteristics (voltage, number of phases, network frequency and amperage) as those
stated on the product label.
Grounding the appliance is obligatory and therefore you must ensure that the electrical system to
which the refrigerator will be connected is grounded and that the grounding system is in perfect
working order.
The manufacturer declines all liability for any damage suffered by people or property as a result of
failure to abide by the above instructions.
To connect the refrigerator to the main electrical line, insert the plug into a socket without using, if
possible, adaptors, multiple sockets and/or extension cords.
accessories be unavoidable, only use items that comply with current safety standards and take
care never to exceed their capacity (in current).
7.4

Use

The FG10I WMFE refrigerator has an oval opening on the side for ducting the pipe to pick up milk
from the container placed inside the refrigerator.
The refrigerator must be used only with the provided tank, in any case with closed milk containers.
The refrigerator can be started and adjusted using the thermostat placed on the back.
Should the use of any of these