Manufacturer Identification; Refrigerator Identification; General Description; Description Of Operation - Vitrifrigo FG10I WMFE Manual De Instrucciones

3

Manufacturer Identification

The product referred to in this manual is designed and made by
Vitrifrigo s.n.c
Via della produzione, 9
61020 Montecchio (PU)
Tel. +39 0721 491080
Fax + 39 0721 497739
Mail [email protected]
4

Refrigerator Identification

Each refrigerator has an identification label with the following information:
- model
- unit identification code
- refrigerated compartment volume
- climatic class
- compressor model
- power supply voltage
- power consumption (W)
- current consumption (A)
- type of refrigerant
- refrigerant quantity
- serial no.: digits 1,2: year of manufacture
digits 3,4: week of manufacture
digits 5,6,7,8: progressive number
5

General Description

The FG10I WMFE refrigerator referred to in this manual is part of the FG range of refrigerators,
expressly designed to be coupled with coffee machines for the purpose of guaranteeing the correct
storage of milk or similar liquids for human consumption, which need to be maintained at a
controlled temperature.
6

Description of Operation

The refrigerator operates using a refrigerant vapour compression cycle that transfers heat from the
inside to the outside, making it possible to keep the liquid for human consumption stored inside it
at a constant, pre-set temperature.
The refrigerant evaporates by removing the heat from the air via the cold inside walls of the
refrigerator (in contact with the evaporator through which it flows) before entering the compressor.
Here the pressure and temperature of the refrigerant are increased and it is then passed through
an air-cooled condenser, where it is condensed. Lastly, the refrigerant fluid returns inside the
evaporator via capillary and the cycle is repeated.
The internal temperature can be varied using the thermostat in the back part of the refrigerator.
7

Installation and Use

7.1

Checking the packaging

As soon as the package arrives, inspect it, making sure that it is not upturned and that it has
suffered no damage during transport. Remove the packaging and inspect the unit for damage of
any kind.
If there is any doubt as to the integrity of the system parts, do not use the refrigerator.
You must inform your dealer of any damage and/or anomalies not later than 24 hours from the
date of purchase.