Tula explore Manual Del Usuario página 8

set up cont.
Correct Positioning – Inward Facing
The width of the panel should be determined by the individual baby's comfort
and leg span. The ergonomically correct position for baby is to be positioned
with the base of the carrier supporting them from knee to knee, with their
knees slightly higher than their bottom in an "M" shaped position.
When choosing which seat width to use with your baby, choose the
width that supports their legs in an "M" shaped position with their legs
supported to the crease of the knee. If the edge of the panel rests on the
baby's calves, rather than under the bend in their knees, then the width you
have chosen is too wide. Always ensure proper placement of baby in the
carrier including leg placement.
Correct Positioning – Outward Facing
Proper carrier set up is important to achieve an ergonomic carrying
1
position when a child is facing out in the Explore carrier.
Be sure the seat is adjusted to the widest setting (page 3) whenever
2
carrying a child in the facing out position.
Fasten the button holes on the outside thigh support to the lower
3
set of buttons on the front of the carrier panel.
The neck support pillow should always be snapped into place on the
4
outside of the carrier in the facing-out position.
5
4
3